sweden bearing suffix–I have introduced USA bearing suffix to you in the older post, today I will make a brief introduction of sweden bearing suffix to you on behalf of China SSHB bearing, who is a distributor of sweden in China.

There are so many sweden bearing suffixes that I just list some of them for reference:

Deep groove ball bearings

RS1: Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the bearing
2RS1: RS1 contact seal on both sides of the bearing
Z: Shield of pressed sheet steel on one side of the bearing
2Z: Z shield on both sides of the bearing
2ZNR: Z shield on both sides of the bearing and snap ring groove in the outer ring with snap ring
M: Machined brass cage, ball centred; different designs and material grades are identified by a figure following the M, e.g. M2
MA: Machined brass cage, outer ring centred
C3: Radial internal clearance greater than Normal

Self-aligning ball bearings

TN: Injection moulded snap-type cage of polyamide 66, ball centred
TN9: Injection moulded snap-type cage of glass fibre reinforced polyamide 66, ball centred

Angular contact ball bearings

A: 30° contact angle
AC: 25° contact angle
B: 40° contact angle
DB: Two bearings matched back-to-back
DF: Two bearings matched face-to-face
CB: Bearing for universal matching. Two bearings arranged back-to-back or face-to-face will have a Normal axial internal clearance before mounting
E: Optimized internal design
J: Pressed window-type steel cage, ball centred
M: Machined window-type brass cage, ball centred, different designs are identified by a figure, e.g. M1

Cylindrical roller bearing

EC: Optimized internal design incorporating more and/or larger rollers and with modified roller/end flange contact
HA3: Case-hardened inner ring
J: Pressed steel cage, roller centred, unhardened
K: Tapered bore, taper 1:12
M: Two-piece machined brass cage, roller centred
MA: Two-piece machined brass cage, outer ring centred
TN9: Injection moulded cage of glass fibre reinforced polyamide 66
VA301: Bearing for railway vehicle traction motors
VL0241: Aluminium oxide coated outside surface of the outer ring for electrical resistance up to 1 000 V DC
VL2071: Aluminium oxide coated outside surface of the inner ring for electrical resistance up to 1 000 V DC
S1: Bearing rings dimensionally stabilized for operating temperatures up to +200 °C
S2: Bearing rings dimensionally stabilized for operating temperatures up to +250 °C

Tapered roller bearings

J: Pressed window-type steel cage, roller centred. A figure following the J indicates a different cage design
Q: Optimized contact geometry and surface finish
R: Flanged outer ring
DB: Matched bearing pair arranged back-to-back. A figure combination immediately following the DB identifies the design of the intermediate rings
DF: Matched bearing pair arranged face-to-face. A figure combination immediately following the DF identifies the design of the intermediate ring
DT: Matched bearing pair arranged in tandem. A figure combination immediately following the DT identifies the design of the intermediate rings

CARB toroidal roller bearings

V: Full complement of rollers (no cage)
K: Tapered bore, taper 1:12
K30: Tapered bore, taper 1:30
M: Machined window-type brass cage, roller centred
CS5: Sheet steel reinforced contact seal of hydrogenated acrylonitrile-butadiene rubber (HNBR) on one side of the bearing
2CS5 : CS5 contact seal on both sides of the bearing. Free space in the bearing filled between 70 and 100% with a high temperature grease.

Spherical roller bearings

C(J), CC: Two window-type steel cages, flangeless inner ring and guide ring centred on the inner ring.
EC(J), ECC(J): Two window-type steel cages, flangeless inner ring, guide ring centred on the inner ring and reinforced roller complement.
CA: One-piece machined brass cage, double-pronged, retaining flanges on the inner ring and guide ring centred on the inner ring.
CAF: As CA, but with a steel cage.
ECA, ECAC: Reinforced roller complement, one-piece machined brass cage, double-pronged, retaining flanges on the inner ring, guide ring centred on the inner ring.
ECAF: As ECA, but with a steel cage.
E: For bearings with a bore diameter d ≤ 65 mm:Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the inner ring.
For bearings with a bore diameter d > 65 mm:Two pressed window-type steel cages, flangeless inner ring and guide ring centred on the cages.
CAFA: One-piece machined steel cage, double-pronged, centred on the outer ring raceway, retaining flanges on the inner ring and guide ring centred on the inner ring .
CAMA: As CAFA, but with a brass cage (fig).

W33: Annular groove and three lubrication holes in outer ring
VA405: Bearings for vibratory applications with surface hardened cages
2CS2: Sheet steel reinforced contact seal of fluoro rubber (FKM) on both sides of the bearing. Annular groove and three lubrication holes in the outer ring; covered with a polymer band. Lubricated with a polyurea high-temperature grease
2CS5: Sheet steel reinforced contact seal of hydrogenated acrylonitrile-butadiene rubber (HNBR) on both sides of the bearing. Otherwise as 2CS2

Spherical roller thrust bearings

E: Optimized internal design and pressed window-type steel cage
EF: Optimized internal design and machined steel cage
EM: Optimized internal design and machined brass cage

Above are only a small portion of sweden bearing suffix, more informations please refer to sweden bearing part numbers. The following are some of sweden bearing most popular in the world for best price:

170 310 110 23234 CC/W33 68 pcs in stock for best price
170 360 120 22334 CC/W33 67 pcs in stock for best price
180 250 52 23936 CC/W33 66 pcs in stock for best price
180 280 74 23036 CC/W33 65 pcs in stock for best price
180 280 100 24036 CC/W33 64 pcs in stock for best price
180 300 96 23136 CC/W33 63 pcs in stock for best price
180 300 118 24136 CC/W33 62 pcs in stock for best price
180 320 86 22236 CC/W33 61 pcs in stock for best price
180 320 112 23236 CC/W33 60 pcs in stock for best price
180 380 126 22336 CC/W33 59 pcs in stock for best price
190 260 52 23938 CC/W33 58 pcs in stock for best price
190 290 75 23038 CC/W33 57 pcs in stock for best price
190 290 100 24038 CC/W33 56 pcs in stock for best price
190 320 104 23138 CC/W33 55 pcs in stock for best price
190 320 128 24138 CC/W33 54 pcs in stock for best price
190 340 92 22238 CC/W33 53 pcs in stock for best price
190 340 120 23238 CC/W33 52 pcs in stock for best price
190 400 132 22338 CC/W33 51 pcs in stock for best price
200 280 60 23940 CC/W33 50 pcs in stock for best price
200 310 82 23040 CC/W33 49 pcs in stock for best price
200 310 109 24040 CC/W33 48 pcs in stock for best price
200 340 112 23140 CC/W33 47 pcs in stock for best price
200 340 140 24140 CC/W33 46 pcs in stock for best price
200 360 98 22240 CC/W33 45 pcs in stock for best price
200 360 128 23240 CC/W33 44 pcs in stock for best price
200 420 138 22340 CC/W33 43 pcs in stock for best price
220 300 60 23944 CC/W33 42 pcs in stock for best price
220 340 90 23044 CC/W33 41 pcs in stock for best price
220 340 118 24044 CC/W33 40 pcs in stock for best price
220 370 120 23144 CC/W33 39 pcs in stock for best price

We sincerely welcome friends at any corner of the world to send inquiry for sweden bearing after looking through sweden bearing suffix, we will reply you immediately and quote you the lowest price! We always willing to cooperate with you in the coming days!

Our Email:okbearing@126.com
Tel:
86-22-24419493
Contact person: Jack

sweden bearing suffix related posts:
sweden wholesale bearings, sweden explorer bearings, sweden bearings Spain, sweden NNU bearings, NNC bearing