skf comercial packaging-A box may seem a simple and logical way of packing products such as bearings, but when SKF bearings needed a new packaging design for its SKF Explorer spherical roller bearings, it decided to go back to basics. It assembled a project team to identify what the requirements were for the design of a new packaging solution that could be used to pack a large number of bearing sizes, that could be used for automated packing and facilitated handling, that was environmental responsible and protected the contents and those handling the boxes and that had labelling that supported SKF’s strong brand values.
Following a review of its packaging for larger bearings, SKF decided to embark upon the development of an improved design that would meet demands for robustness, safety and recycling and would reflect the high quality of the contents.

Both customers and SKF staff were involved in the consultation process and first evaluations of a new packaging solution, the SKF ProofBox, which took place in Sweden in mid 2000. The design team developed a set of broad criteria for the new packaging that covered safety, environment, product protection, handling, production and branding.

The project was a learning curve for all concerned, with testing and refinement until a packaging solution was arrived at that could meet SKF’s strict criteria. The result has been the successful introduction of the SKF ProofBox, which can be used to pack and ship 45 different bearing sizes on automated packing lines.

The design needed to take into account movement and storage, including the ability to transport the package using a forklift truck, to load it efficiently on a half pallet, and to stack packages both symmetrically and asymmetrically. It had to be possible for the bearing to be safely lifted out of the packaging by using, for example, a lifting strap.

The packaging needed to clearly show whether someone had opened it, and it had to be difficult to re-seal. The solution was a box divided horizontally into two halves in the middle. These halves overlap and the slit is sealed with tape. The tape cannot be removed without it being destroyed. To make it even more difficult for an unauthorized person to open the packaging, the product labels were placed across the tape. To make sure that the packaging could not be opened unintentionally, four straps were placed crosswise around the packaging.

With the new packaging it was envisaged that a packaging line with robots could be introduced. When samples became avail-able, it was possible to prepare production for the introduction of the new packaging.

Before the SKF ProofBox was launched, an intensive test programme was initiated:

Rust protection in climate chamber.
Transportation tests (truck, train, boat and aeroplane).
Loading tests.
ASTM handling tests by external packaging and transportation institute.

The success of the SKF ProofBox can be attributed to the fact that SKF set up a project group at an early stage and brought

in expertise from different sectors, adding creativity to the process. SKF invested in tools to test whether the packaging idea functioned in reality. With the aid of the sample packaging, all the weaknesses could be traced and rectified before costly investments were made.

The SKF ProofBox is design protected in most industrial countries.

replacement nsk ‘ball bearing’ Guide helps users convert bearings that have been withdrawn or are difficult to source

NSK bearings’s new replacement nsk ‘ball bearing’ Guide is a comprehensive specification and selection guide, which enables bearing users to convert to NSK, bearings from other manufacturers that are in need of replacement, but have been withdrawn or are unavailable from the original supplier

The guide provides replacement part numbers for metric bearings – ball, cylindrical, spherical and angular contact bearings - in bore diameters from 2mm to 220mm, and Imperial sizes from 1/8” bore to 57.15”. It provides simple at-a-glance tabular formats for ease of use, and includes a pivotal section, with accompanying flowchart, providing step-by-step instructions describing how to order replacement bearings.

The replacement nsk ‘ball bearing’ guide includes some of the highest performing industrial and precision bearings available. Its layout and content have been specifically designed to help bearing users, machine re-builders and bearing distributors select the best type of replacement bearings for their applications.

Extending to 272 pages, the new guide is divided into twelve sections dealing with all aspects of bearing terminology. In addition to interchange part numbers, there are sections regarding bearing types, selection, care and maintenance and inspection and failure types.

One section of the new guide is devoted to NSK’s super precision bearings for machine tool applications This includes the high-speed Robust series bearings, together with data on conventional angular contact bearings, thrust bearings, cylindrical roller bearings, and ball screw support bearings.

Free copies of The guide provides replacement part numbers for metric bearings – ball, cylindrical, spherical and angular contact bearings - in bore diameters from 2mm to 220mm, and Imperial sizes from 1/8” bore to 57.15”. It provides simple at-a-glance tabular formats for ease of use, and includes a pivotal section, with accompanying flowchart, providing step-by-step instructions describing how to order replacement bearings.  Guide are available from NSK’s marketing department.

you can quota for any type of nsk bearings in this guide  our E-mail: cnbearing@126.com 

Timken is a global leader in friction management technologies and provides one of the most complete offerings of antifriction bearings in the industry.

timken Bearing Catalog Includes basic engineering data, part numbers, dimensions and more for ball, cylindrical, needle, plain, spherical, tapered and thrust bearings. Also includes information on some accessories and auxiliary parts.

Spherical Roller Bearing Catalog Includes basic engineering data and part numbers for spherical roller bearings, spherical pillow blocks and metric accessories.

All-Purpose (AP™) Bearing Catalog Includes part number and application information for AP™ bearings for industrial applications such as mining, continuous casters and elevator sheaves.

Thank you for choosing the Timken bearings catalog,if you need any kinds of timken beaings ,please let me kown.we can surply with you the timken bearings in stock for best price our e-mail: cnbearing@126.com

click  here  go to timken bearing online catalog

fag transmission bearing are designed to offer a high degree of passenger comfort, generate little noise and be economical. This is made possible, amongst other things, by the rolling bearings developed by Schaeffler Group (FAG bearings)Industrial that can be found in railway transmissions.

fag transmission bearing consists of Various ball and roller bearing types  mentioned below, further types such as deep groove ball bearings, spherical roller bearings, and angular contact ball bearings are used.

Cylindrical roller bearings

Single-row cylindrical roller bearings offer an advantage over other conventional bearing designs because of how easy they are to dismantle in the inner and outer rings with a roller and cage assembly. This means that the user is offered practical benefits with regards to assembly, dismantling, maintenance and inspection. Cylindrical roller bearings are particularly suitable for transmitting high radial forces. NJ and NUP cylindrical roller bearings can also partly be used for transmitting axial forces. FAG cylindrical roller bearings have a modified linear contact between the rollers and the raceway to prevent edge stresses.

Tapered roller bearings

Tapered roller bearings are can be taken apart, since the inner ring with the roller and cage assembly and the outer ring can be assembled separately. The modified linear contact between the rollers and the raceways prevent edge stresses. Tapered roller bearings can support high radial and axial loads. Since the bearings can only support axial loads in one direction, as well as for supporting internal aligning forces, a second laterally-reversed tapered roller bearing is required for counterstay.

Four-point contact ball bearings

Four-point contact ball bearings are a type of single-row angular contact ball bearing, since they support high axial loads in both directions. Four-point contact ball bearings are usually assembled with cylindrical roller bearings in a loose radial location. Axial minimum loads are required for low friction, especially for high speeds.
The inner ring of a four-point contact ball bearing is split, which means it can accommodate a large number of balls.

If you should need some fag bearings or information please contact us without hesitation.
our E-mail: cnbearing@126.com

when you search the skf  may be  you usually  type “thd skf” in the search engine .

the skf bearings is the world lagest bearing manufactuer which produce all kinds of bearings such as ball bearings  roller bearing   tapered roller bearings   spherical roller bearings  cylindrical roller bearings   and so on

The SKF business is organized into three divisions; Industrial, Automotive and Service. Each division serves a global market, focusing on its specific customer segments.

The Group has a global IS0 14001 environmental certification and global health and safety management standard OHSAS 18001 certification. Its operations are also certified in accordance with ISO 9000 and other customer specific requirements.

SKF has 110 manufacturing sites distributed all over the world and its own sales companies in 70 countries. SKF is also represented in 140 countries through some 15 000 distributors and dealers. SKF is always close to its customers for the supply of both products and services.

just now we have told you most of the skf bearings 
please note: it is “the skf ” not”thd skf” 

if you need any kind of “thd”skf bearings  please let me kown   we will give your the best price and service  your faithfully   jerri  li   our e-mail: cnbearing@126.com 

nsk bearing catalogue come in all sizes, fit to meet the needs of the smallest applications like dental handpieces to the large bearings in a steel mill.

Ball Bearings

NSK ball bearings will accomodate moderate to heavy radial loads and low to moderate thrust loads in either direction.  There are multiple types in order to suit specific application requirements.

Deep groove radial bearings are manufactured as open bearings or with shields or seals. 
Max Type bearings are used in applications involving heavy radial loads and low speeds where thrust loads are comparitively low. 

Double row bearings are used in applications where there are high radial loads and axial loads in both directions. 

Self-Aligning bearings allow for misalignment of the shaft and housing.  They are manufactured with two rows of balls and one continuous spherical raceway in the outer ring. Mast Guide bearings have a high load capacity and are specifically designed for use in fork lift trucks. 

Integral shaft bearings, or “water pump bearings”, are largely used in automotive markets.  They do not require an inner ring, and feature double lip seals to prevent contamination.  
Angular contact bearings are used where radial and thrust loads are combined in the same application. 

Cylindrical Roller Bearings

NSK Cylindrical Roller bearings are designed to carry heavy loads and are suitable for high speed applications.  Their rolling elements are ground to provide maximum contact with the raceway and are precisely crowned to avoid edge loading due to shaft misalignment.

Spherical Roller Bearings

NSK Spherical Roller bearings are double row self-aligning bearings capable of carrying heavy radial loads combined with moderate thrust loads in either direction.  Spherical roller bearings are extremely resistant to shock loads and their self-aligning feature allows full capacity loading despite shaft deflection.

Shaker screen spherical roller bearings are designed to accomodate high loads, static and dynamic misalignment, and severe environmental conditions inherent in vibrating applications such as screens, feeders, and compactors.

Triple ring bearings are specially designed for use with controlled crown rolls used extensively in the paper industry.  These high load capacity bearings provide “shaft within shaft” operation, while simplifying the surrounding structure and installation.

Tapered Roller Bearings

NSK Tapered roller bearings are designed to take combined heavy radial loads and heavy radial thrust loads in one direction while operating at moderate speeds.  Both metric and inch tapers are offered with the only difference being the dimensions of the measure for the bearings.

NSK’s patented HR High Capacity metric tapers offer additional capacity within the same boundary dimensions and are interchangeable with standard metric tapered roller bearings.

Throughout our website you will find information on products and ctalogues to help you with your selection process.  In addition, we have application engineers available to help you with your selection process.

“Bearings make the world go ’round.”－nsk bearing catalogue

as the nsk bearings distributor in China,we can surply most of NSK bearings in stock for best price  welcome your quotation  your sincerely  jerri li   E-mail:cnbearing@126.com

skf bearing catalog interchange consist of Rolling bearings  Bearing units   Bearing housings Plain bearings   Industrial shaft seals   Hydraulic seals

skf  Rolling bearings  catalog interchange

 Deep groove ball bearings
 Tapered roller bearings
 Angular contact ball bearings
 Cylindrical roller bearings
 (fag skf full complement cylindrical roller bearings)
 CARB® toroidal roller bearings
 Angular contact thrust ball bearings
 Needle roller thrust bearings
 Spherical roller thrust bearings
 Backing bearings for cluster mills
 Engineering products
 Bearing accessories
 Combined needle roller bearings
    
   
 Y-bearings
 Self-aligning ball bearings
 Needle roller bearings
 Combined cylindrical roller/taper roller bearings
 Spherical roller bearings
 Thrust ball bearings
 Cylindrical roller thrust bearings
 Tapered roller thrust bearings
 Track runner bearings
 Mechatronics
 Indexing roller units 
 Other SKF rolling bearings

all of above skf bearing catalog interchange we can send you by E-mail

and we can surply most kind of SKF bearings in stock  for best price 
welcome your quotation  our E-mail: cnbearing@126.com   your sincerely  jerri  

 fag skf Full complement cylindrical roller bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads. However, they cannot operate at the same high speeds as caged design cylindrical roller bearings

 fag skf Full complement cylindrical roller bearings consist of Single row full complement cylindrical roller bearings and Double row full complement cylindrical roller bearings

skf  Single row full complement cylindrical roller bearings

NCF design bearings  have two integral flanges on the inner ring and one integral flange on the outer ring and can thus support axial loads acting in one direction and provide axial shaft location in one direction. A retaining ring at the flangeless side of the outer ring holds the bearing assembly together. The axial internal clearance in the bearing is provided in the product table and is designed to permit small axial displacements of the shaft in relation to the housing, e.g. as a result of thermal expansion of the shaft, to be accommodated in the bearing.

NJG design bearings comprise the heavy dimension series 23 and are intended for very heavily loaded, slow speed applications. These bearings have two integral flanges on the outer ring and one integral flange on the inner ring and can thus support axial loads acting in one direction and provide axial shaft location in one direction. In contrast to the other full complement bearing designs, NJG design bearings have a self-retaining roller complement. The outer ring with its two integral flanges together with the roller complement can therefore be withdrawn from the inner ring, without having to take any precautions to prevent the rollers from falling out .

fag  Single row full complement cylindrical roller bearings

includes series of  SL1818  SL1822  SL1829  SL1830  SL1850  SL1923.

skf Double row full complement cylindrical roller bearings

NNCL design bearings  have an inner ring with three integral flanges and a flangeless outer ring. A retaining ring, inserted in the outer ring between the roller rows, keeps all bearing components together. Axial displacement of the shaft relative to the housing in both directions can be accommodated within the bearing. The bearings are therefore suitable for non-locating bearing positions.

NNCF design bearings  have three integral flanges on the inner ring and one integral flange on the outer ring enabling the bearing to provide axial location for a shaft in one direction. A retaining ring is inserted in the outer ring at the side opposite the integral flange and serves to hold the bearing together.

NNC design bearings  are equipped with the same inner ring as bearings of the NNCL and NNCF design. The outer ring is split and held together by retaining elements, which should not be loaded axially. Both parts of the outer ring are identical and carry one integral flange, enabling the bearing to locate the shaft axially in both directions.

NNF design bearings in the NNF 50 and 3194(00) series are always sealed on both sides and filled with grease. The two-piece inner ring has three integral flanges and is held together by a retaining ring. The outer ring has an integral central flange. The bearings can be used to locate a shaft axially in both directions. Because of the large distance between the two rows of rollers, the bearings are also able to accommodate tilting moments.

fag  Double row full complement cylindrical roller bearings

includes series of SL0148  SL0149 SL0248 SL0249  SL04..-PP  SL0450..-PP.

we sell all kind of fag skf full complement cylindrical roller bearings in stock for best price

Please contact us for all your requirements by Phone , Fax or Email  cnbearing@126.com

We are pleased to introduce ourselves as AUTHORIZED FAG BEARING DISTRIBUTOR CHINA.  We are quite proud that our materials have been found satisfactory to our customers, who have been placing repeated orders on us.

The FAG brand started with an ingenious idea. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany that, for the first time, made it possible to produce absolutely round steel balls by grinding. This invention is regarded as the foundation for the entire rolling bearing industry. This is one of the reasons why FAG has long been considered to be a pioneer in rolling bearing technology. Today, FAG is one of the leading brands for applications in machine building, the automotive industry and in aviation and aerospace technology. The Schaeffler Group’s FAG brand has companies, subsidiaries and sales agencies in all major industrial countries.

Since 2001, FAG has been part of the Schaeffler Group and has been active in all of the group’s divisions – Aerospace, Automotive and Industrial. Together with INA’s complementary product range, FAG has one of the widest product portfolios in the rolling bearing industry, covering nearly all applications in production machinery, power transmission and rail technology, heavy industry and consumer products.

FAG ball bearings and roller bearings are manufactured as standard and special bearings in many designs and sizes with diameters ranging from 3 millimeters to 4.25 meters. Together with INA bearing , FAG offers customers comprehensive support and services for the diagnosis, maintenance and mounting of rolling bearings and complete systems.

As a forward-looking company, the Schaeffler Group with its brand FAG has invested significant amounts in research and development. Modern simulation methods and testing facilities as well as special materials engineering laboratories ensure the continuous development and improvement of all product lines and confirm the innovative force of FAG.

Our objective is to exceed our customer’s expectations in a timely manner, by providing

quality products and by constantly improving the services we provide.

Please contact us for all your requirements by Phone , Fax or Email  cnbearing@126.com

When the leading Chinese wind turbine company Goldwind was awarded the contract to supply 33 turbines for the 2008 Beijing Olympic Games, the company selected SKF as the bearing supplier for this prestigious project.

The 1.5 MW turbines are Goldwind’s largest turbines and, like all OEM’s, Goldwind knew that the larger the turbine the more they need to be sure about the reliability of critical components like bearings. That is because turbines producing higher energy outputs are usually physically bigger and taller than smaller energy-producing units. And that results in more wind being captured, which leads to higher forces on machinery at the top of the turbine where the electricity is generated,. In the case of Goldwind’s 1.5 MW turbines, that is 65 metres from the ground.

In choosing SKF, the Goldwind company based its decision on a good history of co-operation with SKF on smaller turbines, but also the fact that SKF had supplied bearings for many bigger turbines around the world, including the biggest in the world at that time; Repower’s 5 MW turbine that was designed for the extremely tough environment of offshore wind energy generation.

Mrs. Qiaozhen Ning, director of mechanical design at Goldwind, said “we are very happy to select SKF for this project because we know from experience that they understand the application demands of wind turbines, and the technical support we get from the engineers in SKF China is excellent.”

The 1.5 MW design is a direct drive turbine requiring no gearbox, but the turbine mainshaft — to which the blades and rotor are connected — must be supported by bearings to allow the blades and rotor to rotate in order to produce electricity.

The bearings selected for the 1.5 MW turbines are a single-row cylindrical bearing, almost 1 metre outside diameter, and a double-row tapered roller bearing, almost 600 mm outside diameter.

SKF calculations show that both bearings have sufficient capacity and design features to operate reliably in the expected range of weather conditions to be encountered during the Games but also for many years after the Games are finished, when the electricity generated will supply ‘green’ power to the city of Beijing. The turbines are all erected and many are already producing power.

Since the contract was awarded to Goldwind another 10 turbines have been ordered. The 43 turbines now constitute a wind farm on the banks of the Guanting reservoir in Beijing. These turbines are part of the increasing use of wind power in China and will probably be seen by millions around the world as television reports of the Olympic rowing event, that takes place on the Guanting reservoir, are broadcast in August 2008.